1. Design & Illustration
  2. Clip Studio Paint

How to Paint Watercolor Flowers in Clip Studio Paint

by
Read Time:7 minsLanguages:
Sponsored Content

This sponsored post features a product relevant to our readers while meeting our editorial guidelines for being objective and educational.

Final product imageFinal product imageFinal product image
What You'll Be Creating

If you want to learn how to paint watercolor flowers digitally, in this tutorial I'll show you how to make a watercolor effect in Clip Studio Paint. I'll show you what brushes to use, how to shade the flowers, how to create a watercolor edge, and how to finish it all with a paper texture.

What You Will Learn in This Clip Studio Paint Tutorial

  • How to use Clip Studio Paint
  • How to paint watercolor flowers
  • What are the best Clip Studio Paint brushes for creating a watercolor effect
  • How to change the hue in Clip Studio Paint

1. How to Prepare the File for a Watercolor Effect

Step 1

Open Clip Studio Paint. Create a New Document (Control-N) with the resolution shown below:

create new document in clip studio paintcreate new document in clip studio paintcreate new document in clip studio paint

Step 2

Take a Brush (B) and go to the Realistic tab. Select Flat Watercolor Brush.

pick flat watercolor brushpick flat watercolor brushpick flat watercolor brush

Step 3

This brush is not easy to control, but that’s the point—it will make your “watercolor” strokes look less digital and more convincing. Use this brush to paint a couple of flowers and leaves, each on a separate layer. Paint each shape with a single stroke to create a uniform color. Don’t worry about the colors being too light—we’ll take care of that in a second.

paint various leaves and flowerspaint various leaves and flowerspaint various leaves and flowers

Alternatively, you can adjust the brush properties to be able to paint with multiple strokes and achieve darker colors. Change the Blending Mode to Replace Alpha, and decrease Texture Density. Turn off the Watercolor Edge. If you decide to choose this method, just hide all the layers afterwards and skip to Step 6.

how to paint with multiple strokeshow to paint with multiple strokeshow to paint with multiple strokes
painting method differencepainting method differencepainting method difference

Step 4

This brush creates semi-opaque strokes, so let's make them slightly more visible. Select the layer on top, and then hold Shift and select the last one to select them all. Then Right-Click > Duplicate Layer.

duplicate layers in clip studio paintduplicate layers in clip studio paintduplicate layers in clip studio paint

Step 5

Now merge the copies with the originals to make the colors more lively. To do this, select a copy and press Control-E—do this for every copied layer. Then hide all the layers by clicking the eye icon next to them.

make the colors more intensemake the colors more intensemake the colors more intense

Step 6

Our wreath will be based on the shape of a circle, so let’s create a circle to act as our template. Create a New Layer and select the Figure tool (U). In the Direct Draw tab, select the Ellipse. Check Aspect Type and increase the Brush Size.

take the ellipse tooltake the ellipse tooltake the ellipse tool

Step 7

Click and drag on the canvas to draw a thick circle. Use the Move Layer tool (K) to position the circle in the center of the canvas.

draw a thick circledraw a thick circledraw a thick circle

Step 8

Drag the layer under the other layers, lower its Opacity to make it barely visible, and Lock it.

lower the opacity of the circlelower the opacity of the circlelower the opacity of the circle

Step 9

Now show all the other layers again and use the Move Layer tool (K) to create a composition out of them. Use Control-C/Control-V to quickly duplicate the layer, and merge the copies afterward with Control-E to keep everything in order. Feel free to transform the objects with Control-T—resize and rotate them to create a nice, natural composition.

In the case of the leaves, it may be useful to flip them vertically sometimes. To do this, go to Edit > Transform > Flip Vertical. Also, don’t be afraid to rearrange the order of the layers to reflect the layers of a real wreath. When you're done, hide or remove the circle.

create a floral composition in clip studio paintcreate a floral composition in clip studio paintcreate a floral composition in clip studio paint

Step 10

Because watercolors are not fully opaque, you can see through the layers. Normally, if you painted with real watercolors, you’d be careful not to make these elements overlap, but we’re working digitally, so we can get rid of these overlapping areas with a trick!

Select the layer on top and take the Auto Select tool (W). Click the outside area of the element to select it, and then press Control-Shift-I to invert it.

select the flowersselect the flowersselect the flowers

Step 11

Now select the layer below and press Backspace or Delete. Then go to another layer and repeat, until you reach the bottom of the stack. At this point, you shouldn’t see through the uppermost element anymore. Press Control-D to deselect.

remove the background of the flowersremove the background of the flowersremove the background of the flowers

Step 12

Repeat the process with all the other layers to get rid of the overlap completely.

how to make watercolors opaque how to make watercolors opaque how to make watercolors opaque

Step 13

Now select all the layers and Lock their Transparent Pixels. Now you can paint over the layers without having to worry about staying within the lines!

lock transparent pixelslock transparent pixelslock transparent pixels

2. How to Paint Watercolor Flowers in Clip Studio Paint

Step 1

Let’s start with the big leaves under the flowers. Take the Rough Wash brush from the Realistic Watercolor tab, pick the color of the leaves with the Eyedropper (I), and start painting. This should allow you to give the leaves a more uneven surface, characteristic of watercolor shading. Experiment with the Watercolor Edge in the brush settings to create the effect of a quickly drawing pigment.

take rough wash brushtake rough wash brushtake rough wash brush
add watercolor texture to leavesadd watercolor texture to leavesadd watercolor texture to leaves

Step 2

Now go to the Layer Property panel. Add a Border Effect and select Watercolor Edge. Experiment with the settings to create an edge that's characteristic of watercolor strokes.

add watercolor edgeadd watercolor edgeadd watercolor edge
leaves with watercolor edge appliedleaves with watercolor edge appliedleaves with watercolor edge applied

Step 3

Do the same with the other leaves, adjusting the amount of texture and the darkness of the edge of each of them individually. Splashes of paint will look better on dark colors than on bright ones.

add watercolor effect to all leavesadd watercolor effect to all leavesadd watercolor effect to all leaves

Step 4

You can finish the little white flowers in a similar way. Add some texture to their center.

shade the little flowersshade the little flowersshade the little flowers

Step 5

To add a yellow center to the flowers, create a New Layer and paint with the Oil Paint brush from the Thick Paint tab.

take oil paint brushtake oil paint brushtake oil paint brush
add center to the little flowersadd center to the little flowersadd center to the little flowers

Step 6

Creating the big flowers will require a little more effort. Let’s start with the pink one. Hide its layer or lower its Opacity, and create a New Layer above it. Then take the Oil Paint brush and paint the outermost petals—draw three sets of them, each on a separate layer.

draw outer petals of a rosedraw outer petals of a rosedraw outer petals of a rose
add more petalsadd more petalsadd more petals
finish the rose outlinefinish the rose outlinefinish the rose outline

Step 7

Create another layer and paint three more petals, creating a ring and leaving some space in the center.

add inner petals of the roseadd inner petals of the roseadd inner petals of the rose

Step 8

Create another layer and add a few more little petals, with the ones in the center being the smallest.

add the center of the roseadd the center of the roseadd the center of the rose

Step 9

Shade the petals the same way as you did with the leaves. Don’t forget to lock the transparent pixels first! Also, because these petals are on separate layers, they won’t appear merged when you add a watercolor edge to them.

shade a watercolor roseshade a watercolor roseshade a watercolor rose

Step 10

Draw the brown flowers in a similar way. First, draw the outer petals on one layer...

create white petalscreate white petalscreate white petals

Step 11

... then draw the inner petals on a New Layer.

add inner white petalsadd inner white petalsadd inner white petals

Step 12

Shade the petals with the same technique as before.

shade white roseshade white roseshade white rose

Step 13

The orange flower is no different—it can be created easily with two layers of petals.

add orange petalsadd orange petalsadd orange petals
add orange inner petalsadd orange inner petalsadd orange inner petals
shade orange flowershade orange flowershade orange flower

Step 14

It's quite difficult to create sharp, white areas in watercolor paintings, so to make the watercolor effect more convincing, create a New Layer under the flowers. Use the Rough Wash brush to paint a chaotic background behind each flower.

add background to flowersadd background to flowersadd background to flowers

3. How to Finish the Watercolor Effect

Step 1

The painting is done, but we can make it a little more convincing with a few tricks. Create a New Layer on top, switch to white, and take the Airbrush (B). Use the Spray and Droplet brushes to add some white dots here and there.

take spray brushtake spray brushtake spray brush
add droplets effectadd droplets effectadd droplets effect

Step 2

Create a New Layer and open the Texture tab in the Material panel. Pick a texture that looks the most like paper to you, and drag it to the layer.

select paper texture select paper texture select paper texture

Step 3

In the Layer Property panel, select Overlay Texture to make the texture see-through. Adjust the Strength of the texture, and adjust its size.

how to make texture overlay in clip studio painthow to make texture overlay in clip studio painthow to make texture overlay in clip studio paint
paper texture effect appliedpaper texture effect appliedpaper texture effect applied

Step 4

If you're not happy with the color scheme you've ended up with, now I'll show you how to change the hue in Clip Studio Paint.

First, you need to merge the layers. To do this, create a New Layer and go to Layer > Merge Visible to New Layer. Then go to Edit > Tonal Correction > Hue/Saturation/Luminosity. Now you can drag the first slider to adjust the colors.

how to change hue in Clip Studio Painthow to change hue in Clip Studio Painthow to change hue in Clip Studio Paint
hue changed examplehue changed examplehue changed example

Beautiful!

Now you know how to use Clip Studio Paint and how to paint watercolor flowers in this program!

how to paint watercolor flowershow to paint watercolor flowershow to paint watercolor flowers

Want More?

If you want to learn more about creating flower illustrations, try these tutorials as well:


One subscription.
Unlimited Downloads.
Get unlimited downloads