Unlimited PS Actions, graphics, videos & courses! Unlimited asset downloads! From \$16.50/m

# How to Create a Modern Kitchen in Adobe Illustrator

Difficulty:BeginnerLength:LongLanguages:

In today’s tutorial we’re going to put our interior designer hats on and create ourselves a nice little modern kitchen using nothing but the easiest and most useful tools that Illustrator has to offer.

Also, you can always expand your set by heading over to GraphicRiver where you’ll find a great selection of kitchen-themed vector packs, just waiting to be clicked on.

That being said, let’s jump straight into it!

## 1. How to Set Up a New Project File

Since I’m assuming you already have Illustrator up and running in the background, bring it up and let’s set up a New Document (File > New or Control-N) for our project using the following settings:

• Number of Artboards: 1
• Width: 1200 px
• Height: 600 px
• Units: Pixels

• Color Mode: RGB
• Raster Effects: Screen (72ppi)
• Preview Mode: Default

## 2. How to Set Up a Custom Grid

Now, I know we’re not working on icons today, but since we’re going to be creating the illustration using a pixel-perfect workflow, we’ll want to set up a nice little Grid so that we can have full control over our shapes.

### Step 1

Go to the Edit > Preferences > Guides & Grid submenu, and adjust the following settings:

• Gridline every: 1 px
• Subdivisions: 1

### Step 2

Once we’ve set up our custom grid, all we need to do in order to make sure our shapes look crisp is enable the Snap to Grid option found under the View menu, which will transform into Snap to Pixel each time you enter Pixel Preview mode.

Now, if you’re new to the whole “pixel-perfect workflow”, I strongly recommend you go through my How to Create Pixel-Perfect Artwork tutorial, which will help you widen your technical skills in no time.

## 3. How to Set Up the Layers

Once we’ve finished setting up our project file, it would be a good idea to structure our document using a couple of layers, since this way we can maintain a steady workflow by focusing on one section of the illustration at a time.

That being said, bring up the Layers panel, and create a total of two layers, which we will rename as follows:

• layer 1: background
• layer 2: illustration

Quick tip: I’ve colored all of my layers using the same green value, since it’s the easiest one to view when used to highlight your selected shapes (whether they're closed or open paths).

## 4. How to Create the Background

We’re going to kick off the project by creating the little tile background, so make sure you’re on the right layer (that would be the first one), locking the other one, and let’s get started.

### Step 1

Create a line for the floor using a 440 px wide 4 px thick Stroke line, which we will color using #363C4C and then Center Align to the underlying Artboard, positioning it at a distance of 212 px from its bottom edge.

### Step 2

Create the first row of tiles using fourteen 26 x 8 px rectangles (#DEF8F9) which we will horizontally distribute 2 px from one another, grouping (Control-G) and then positioning them at a distance of 32 px from the floor's left edge.

### Step 3

Create the second row using a copy of the one that we’ve just grouped, which we will position above it at a distance of 2 px, pushing it to the left by 14 px using the Move tool (right click > Transform > Move > Vertical > -14 px).

### Step 4

Create the remaining tiles by selecting the two rows that we already have, and then dragging them to the top while holding down the Alt-Shift keys to create the first set of copies, making sure to maintain the same 2 px gap. Once you have the first set, press Control-D (Duplicate) seven times to add the remaining rows.

### Step 5

Take a couple of moments and color some of the tiles using #C1EAEA, selecting and grouping all the rows together using the Control-G keyboard shortcut before moving on to the next section.

## 5. How to Create the Refrigerator

Assuming you’ve managed to create the background, Lock its layer and then move on up to the second one, where we will start working on our first kitchen appliance.

### Step 1

Create the main shape for the fridge’s right section using a 56 x 128 px rectangle, which we will color using #E7EBF2 and then position 6 px above the floor and 42 px from its right edge.

### Step 2

Give the shape an outline by creating a copy of it (Control-C) which we will Paste in Front (Control-F) and then adjust by first changing its color to #363C4C and then flipping its Fill with its Stroke (Shift-X). Set the Weight to 4 px, selecting and Grouping (Control-G) both shapes together afterwards.

### Step 3

Add the door’s handle using a 4 x 20 px rectangle (#363C4C), which we will position at a distance of 8 px from the outline’s left side and 40 px from its bottom one. Once you’re done, select and Group (Control-G) all three shapes together.

### Step 4

Create the fridge’s smaller section using a 48 x 128 px rectangle (#E7EBF2) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position on the left side of the previous section.

### Step 5

Start working on the little water dispenser by creating a 24 x 24 px square (#5592A0) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then Center Align to the left door, positioning them 40 px from the larger outline’s bottom edge.

### Step 6

Start adding details to the dispenser by adding the bottom insertion using an 8 x 3 px rectangle (#363C4C) which we will Center Align to its bottom edge.

### Step 7

Create the bottom tray using a 24 x 2 px rectangle (#363C4C) which we will center align to the water dispenser’s main body, positioning it 2 px from its bottom edge.

### Step 8

Create the main body of the actual water dispensing device using a 12 x 10 px rectangle (#363C4C), which we will Center Align to the top edge of the current section.

### Step 9

Add a smaller 4 x 4 px square (#363C4C) below the shape that we’ve just created, followed by 2 x 8 px rectangle (#363C4C) on its right side, selecting and Grouping (Control-G) all three shapes together once you’re done.

### Step 10

Finish off the water dispenser by adding the little buttons using four 4 x 2 px rectangles (#363C4C) which we will Group (Control-G) and then position above the unit itself at a distance of just 4 px. Once you’re done, select and Group (Control-G) all of the current section’s composing shapes, doing the same for the entire fridge afterwards.

### Step 11

Move towards the bottom of the appliance, and then start working on its standing feet by creating a 100 x 4 px rectangle (#363C4C) which we will position underneath its larger sections.

### Step 12

Finish off the refrigerator by adding its feet using three 8 x 4 px rectangles (#363C4C) which we will position below the wider rectangle from the previous step. Once you’re done, select and Group (Control-G) all of the bottom section’s composing shapes together, doing the same for the entire fridge afterwards.

## 6. How to Create the Open Kitchen Cabinet

The next item off our “kitchen essentials” list is the open cabinet, so let’s get started.

### Step 1

Create the cabinet’s main body using a 72 x 52 px rectangle (#82868E) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position on the left side of the fridge, so that their outlines end up overlapping.

### Step 2

Create the inner section of the storage unit using a 60 x 24 px rectangle (#5A616D) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then Center Align to the larger body, positioning it at a distance of 18 px from its upper edge.

### Step 3

Add the shelf using a 60 px wide 4 px thick Stroke line (#363C4C), which we will Center Align to the cabinet’s inner section, selecting and Grouping them afterwards using the Control-G keyboard shortcut.

### Step 4

Create the unit’s bottom section using a 68 x 8 px rectangle (#4B5463) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position below the larger body, making sure to left align it to its outer edge.

### Step 5

Create the towel rail using a 44 px wide 4 px thick Stroke line (#363C4C) which we will Center Align to the cabinet’s inner section, positioning it above at a distance of 10 px from its top edge.

### Step 6

Start working on the towel by creating its front section using a 24 x 10 px rectangle (#A1C689) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position over the previous shape, horizontal Center Aligning the two.

### Step 7

Add the back section using another 24 x 10 px rectangle (#7D9E67) with a 4 px thick outline (#363C4C), which we will position below the shapes that we’ve just grouped in the previous step.

### Step 8

Add the little fringes using five 2 x 4 px rectangles (#363C4C) horizontally spread 2 px from one another, which we will Group (Control-G) and then Center Align to the upper edge of the towel’s back section. Once you’re done, select and Group all of the towel’s shapes together using the Control-G keyboard shortcut.

### Step 9

Finish off the cabinet by adding the little bowls, which we will create using three rectangles (12 x 6 px, 10 x 6 px, 10 x 4 px - #363C4C) which we will adjust by setting the Radius of their bottom corners to 4 px from within the Transform panel’s Rectangle Properties. Once you’re done, select and Group all of the current unit’s composing shapes using the Control-G keyboard shortcut.

## 7. How to Create the Stove

Assuming you’ve finished working on the cabinet, move a few pixels towards the left, and let’s start working on our second appliance.

### Step 1

Create the stove’s bottom section using a 56 x 8 px rectangle (#4B5463) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position on the left side of the open cabinet.

### Step 2

Create the stove’s main body using a 56 x 52 px rectangle (#E7EBF2) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position above the previous section.

### Step 3

Start working on the oven by creating its door using a 44 x 32 px rectangle (#B5685B) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then Center Align to the larger body, positioning it 10 px from its top edge.

### Step 4

Add the oven shelves using two 44 px wide 4 px thick Stroke lines (#363C4C) which we will vertically stack at a distance of 12 px from one another, Grouping (Control-G) and then Center Aligning them to the larger door, positioning them 4 px from its bottom edge.

### Step 5

Add the broiler burner using nine 2 x 4 px rectangles (#363C4C) horizontally separated by 2 px from one another, which we will Group Control-G) and then Center Align to the oven door's bottom edge.

### Step 6

Create the tray using a 24 x 4 px rectangle (#363C4C), on top of which we will add a slightly wider 28 x 2 px one (#363C4C), which we will Group (Control-G) and then Center Align to the oven’s bottom shelf.

### Step 7

Add the oven’s handle using a 20 x 8 px rectangle (#363C4C) which we will Center Align to the top edge of the door’s outline. Once you’re done, select and Group all of the oven’s composing sections together using the Control-G keyboard shortcut.

### Step 8

Create the left burner dials using four 4 x 4 px circles (#363C4C) horizontally spread 2 px from one another, which we will Group (Control-G) and then position above the handle, at a distance of 6 px from the stove’s left edge and 2 px from its top one.

### Step 9

Add the oven dial using the same 4 x 4 px circle (#363C4C), which we will Center Align to the previous dials, positioning it onto the right side of the stove, at a distance of 8 px from them.

### Step 10

Create the timer dial using a slightly smaller 2 x 2 px circle (#363C4C), which we will position 4 px from the right side of the previously created shape, between the oven’s handle and the larger dial.

### Step 11

Finish off the stove, by adding the top insertions using two 4 x 3 px rectangles (#363C4C), which we will align to the larger body’s top edge, positioning them 4 px from its outer edges. Once you’re done, select and Group all of the unit’s composing sections using the Control-G keyboard shortcut.

## 8. How to Create the Closed Cabinet

Once you’re done with the stove, move a few pixels to the left, and let's start working on our closed cabinet.

### Step 1

Create the unit’s bottom section using a 72 x 8 px rectangle (#4B5463) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position on the left side of the stove.

### Step 2

Add the cabinet’s main body using a 72 x 52 px rectangle (#5A616D) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position above the previous section.

### Step 3

Create the first drawer using a 60 x 12 px rectangle (#82868E) with a 4 px thick outline (#363C4C), to the center of which we will add a smaller 28 x 4 px rectangle (#363C4C). Group (Control-G) all three shapes together and then Center Align them to the larger body, positioning them 2 px from its top edge.

### Step 4

Finish off the cabinet by adding the second drawer, which we will create using a 60 x 22 px rectangle (#82868E) with a 4 px thick outline (#363C4C), on top of which we will add the handle using a 28 x 4 px rectangle (#363C4C). Once you’re done, select and Group (Control-G) all three shapes together, doing the same for the entire unit afterwards.

## 9. How to Create the Kitchen Countertop

Once we’ve finished working on our second cabinet, we can focus on the countertop which houses the sink itself and the stove’s burner grates.

### Step 1

Create the actual countertop using a 200 x 6 px rectangle (#5A616D) with a 4 px thick outline (#363C4C), which we will Group and then position above the two cabinets and stove.

### Step 2

Create the sink using a 40 x 6 px rectangle (#363C4C), which we will position onto the countertop, making sure to Center Align it to the open cabinet.

### Step 3

Draw in the tap using a 4 px thick Stroke (#363C4C), which we will Center Align to the previously created shape’s bottom edge.

### Step 4

Create the tap's handle using a 4 x 4 px square (#363C4C), to the left of which we will add a 2 x 8 px rectangle (#363C4C). Group (Control-G) the two and then position them on the left side of the previously drawn shape, selecting and then Grouping (Control-G) all of the sink’s composing shapes as well.

### Step 5

Finish off the countertop by adding the burner grates using three 8 x 4 px rectangles (#363C4C) spaced 4 px horizontally from one another, which we will Group (Control-G) and then Center Align to the stove’s main body. Once you’re done, select and Group (Control-G) all of the current section’s composing shapes before moving on to the next step.

## 10. How to Create the Washing Machine

Next on our appliance list is the washing machine, so without wasting any more time, let’s jump into it.

### Step 1

Create the device’s bottom section using a 52 x 8 px rectangle (#5A616D) with a 4 px thick outline (#363C4C), to the center of which we will add another 52 x 2 px rectangle (#363C4C). Group (Control-G) all three shapes together and then position them on the left side of the closed cabinet.

### Step 2

Add the washing machine’s main body using a 52 x 46 px rectangle (#E7EBF2) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position on top of the previous section.

### Step 3

Create the front door using a 28 x 28 px circle (#5592A0) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then Center Align to the underlying larger body, positioning them at a distance of 4 px from its upper edge.

### Step 4

Add the washing machine’s inner darker section using a 20 x 20 px circle (#363C4C), which we will Center Align to the previously grouped shapes.

### Step 5

Create the handle using an 8 x 8 px circle (#5592A0) on top of which we will add a smaller 4 x 4 px one (#363C4C). Group (Control-G) the two shapes together, and then Center Align them to the right edge of the door’s visible fill shape, doing the same for the entire door afterwards.

### Step 6

Add the washing machine’s bottom insertion using a 32 x 4 px rectangle (#363C4C), which we will Center Align to the bottom edge of its larger body.

### Step 7

Add the second insertion using a slightly narrower 20 x 4 px rectangle (#363C4C), which we will center align to the larger body’s top edge. Once you’re done, select and Group all of the current section’s composing shapes together using the Control-G keyboard shortcut.

### Step 8

Create the washing machine’s upper section using a 52 x 12 px rectangle (#82868E) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position above its larger body.

### Step 9

Add the display using a 16 x 4 px rectangle (#363C4C) which we will Center Align to the previously created section.

### Step 10

Create the left dials using two 4 x 4 px circles (#363C4C) positioned 2 px from one another, which we will Group (Control-G) and then Center Align to the display, positioning them 4 px away from it.

### Step 11

Add the right dial using another 4 x 4 px circle (#363C4C), which we will position onto the opposite side of the display, 8 px from its right edge. Once you’re done, select and Group all of the current section’s composing shapes together using the Control-G keyboard shortcut.

### Step 12

Finish off the washing machine by creating the back panel using a 36 x 8 px rectangle (#5A616D) with a 4 px thick outline (#363C4C), to the bottom of which we will add a smaller 24 x 4 px rectangle (#363C4C). Group (Control-G) all three shapes together, positioning them above the previous section, making sure to do the same for the entire unit afterwards.

### Step 13

Create the first towel using a 26 x 8 px rounded rectangle (#929BDD) with a 4 px Corner Radius and a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position onto the washing machine, at a distance of 2 px from its right edge.

### Step 14

Create the second towel using a copy of the first one (Control-C > Control-F), which we will position on top, making sure to change the color of the fill shape to #A1C689. Once you’re done, select and Group both of them together using the Control-G keyboard shortcut.

## 11. How to Create the Shelf and Decorative Elements

We’ve done the open cabinet, and we’ve done the closed cabinet, so now it's time for a good old suspended shelf.

### Step 1

Create the shelf’s main body using a 104 x 6 px rectangle (#82868E) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position above the countertop, at a distance of 14 px from the tap and 16 px from the fridge.

### Step 2

Add the little brackets using two 4 x 8 px rectangles (#363C4C) horizontally spaced 76 px from one another, which we will Group (Control-G) and then position below the shelf, Center Aligning them to its larger body. Once you’re done, select all of the shelf’s composing shapes and Group (Control-G) them as well.

### Step 3

Create the empty glasses using four 6 x 12 px rectangles (#5592A0) with a 4 px thick outline (#363C4C), which we will individually Group (Control-G) and then position 8 px away from one another (4 px from one outline to another). Once you’re done, position the shapes onto the shelf, at a distance of 4 px from its right edge.

### Step 4

Move a few pixels to the left, and start working on the little Bluetooth speaker by creating its main body using a 32 x 16 px rectangle (#929BDD) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position onto the shelf, 8 px from its left edge.

### Step 5

Add the speaker units using two 8 x 8 px circles (#363C4C), which we will position 8 px away from one another, Grouping (Control-G) and then Center Aligning them to the device’s body.

### Step 6

Create the top and bottom insertions using two 8 x 4 px rectangles (#363C4C), which we will vertically stack at a distance of 8 px from one another, Grouping (Control-G) and then Center Aligning the two to the larger body.

### Step 7

Add the speaker’s buttons using three 4 px tall rectangles (#363C4C), horizontally spaced 2 px from one another, which we will Group (Control-G) and then position on top of the speaker, at a distance of 6 px from its left edge. Once you’re done, select and Group all of the device’s composing shapes together using the Control-G keyboard shortcut.

## 12. How to Create the Window

Assuming that we didn’t design the kitchen to be used inside a bunker, let’s create a little window to give it some air.

### Step 1

Start by creating the frame using a 52 x 68 px rectangle (#E2AA7D) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then position at a distance of 12 px from the countertop and 16 px from the suspended shelf.

### Step 2

Add the frame’s inner section using a 40 x 56 px rectangle (#A5795B) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then Center Align to the previously created section.

### Step 3

Create the glass window using a 30 x 46 px rectangle (#ABDBEF) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then Center Align to the window’s inner section.

### Step 4

Add the hinges using two 10 x 8 px rectangles (#363C4C), vertically stacked 32 px from one another, which we will Group (Control-G) and then Center Align to the left side of the frame’s inner section.

### Step 5

Create the clouds using three 4 px tall rectangles (#EDF6F9) which we will adjust by setting the Radius of their inner facing corners to 2 px. Take your time, and once you’re done, select and Group all three shapes together using the Control-G keyboard shortcut.

### Step 6

Finish off the window by creating its handle using a 16 x 4 px rectangle (#363C4C), which we will center align to the right edge of the frame’s inner section. Once you’re done, select and Group all of its composing shapes using the Control-G keyboard shortcut.

## 13. How to Create the Ceiling Lighting

We are now down to our kitchen’s last section, so without wasting any more time, let’s finish this.

### Step 1

Create the ceiling line using a 184 px wide 4 px thick Stroke (#363C4C), which we will Center Align to the Artboard, positioning it at a distance of 18 px from the window’s top edge.

### Step 2

Start working on the center lighting fixture, by creating its main body using a 12 x 16 px rectangle (#E8B169) with a 4 px thick outline (#363C4C), which we will Group (Control-G) and then Center Align to the shape from the previous step, positioning it 18 px below it.

### Step 3

Add the horizontal decorative line using a 12 px wide 4 px thick Stroke (#363C4C), which we will Center Align to the fixture’s main body, positioning it 2 px from its bottom edge.

### Step 4

Draw in the cable section connecting the fixture to the ceiling using an 18 px tall 4 px thick Stroke line (#363C4C), selecting and Grouping (Control-G) all of its composing shapes together afterwards.

### Step 5

Create the remaining fixtures using two copies (Control-C > Control-F twice) of the one that we’ve just finished working on, which we will position onto the sides, at a distance of 40 px from the original.

### Step 6

Finish off the ceiling and with it the illustration itself by adding the lighting’s base using a 128 x 6 px rectangle (#363C4C), which we will center align to the bottom of its line. Once you’re done, select and Group (Control-G) all of the current section’s composing shapes together, doing the same for the entire illustration afterwards.

## Great Job!

There you have it—a step-by-step approach on how to build your very own modern kitchen, using nothing but the simplest solutions. I hope you had fun doing this tutorial, and most importantly learned something new and useful along the way.