Advertisement
Photo Effects

Create an Elephant Sundae Using Photo Manipulation Techniques

by

Photoshop is great at seamlessly combing photos to create an entirely new scene. In this tutorial we will create an elephant sundae using several stock photos. Let's get started!


Resources

This tutorial uses the following images but you are welcome to find alternatives for the ice cream and wine glass images.


Step 1

Open the wine glass image. Our first step is to try to manipulate the wine glass into a more dessert-like container. Start by selecting the top half of the wine glass and Copy (Command/Ctrl + C) and Paste (Command/Ctrl + V) it on to a new layer.


Step 2

Transform > Warp this layer to drop the base of the glass more. This will result in a more defined perspective.


Step 3

As an additional step, I've used the Liquify Tool on the base of the bulb of the glass. This will help with the perspective.


Step 4

Go back to the original "Background" Layer and select the base of the wine glass. Copy (Command/Ctrl + C) and Paste (Command/Ctrl + V) this on to a new layer.


Step 5

Transform (Command/Ctrl + T) this layer by scaling it vertically until the base of the wine glass has a stronger perspective.


Step 6

Move this layer up so that it appears to be a shorter dessert glass.

Use a layer mask to help blend this layer with the rest of the glass. Don't worry about the "Background" layer—we will crop this down later.


Step 7

Using a soft brush set to a low Opacity, sample the background colors and start blending so that the background appears uniform. Quickly sample colors by holding down Alt with the Brush Tool selected to switch to the Eyedropper Tool.


Step 8

To finish the dessert glass, we need to correct the perspective on the top of the glass. Currently, we are looking ‘up' at the opening and we need to be looking 'down'.

Using a small brush, sample the colors on the glass and repaint the sides that overlap. The goal is to reverse the direction of the overlap to make it appear that the opening of the wine glass is now in front.


Step 9

Save this as a separate file in case you need to go back and change anything. Flatten this image and select just the wine glass and drag it down to the bottom of the canvas.

Next, select the space just above the wine glass and stretch it to fill in the top of the image.


Step 10

The next step is to go through your images of the elephant and extract the parts you can use. Use the Pen Tool to make your selections and Paste them to a new layer.


Step 11

When you're done extracting all the pieces, place them into the new scene with the dessert glass.


Step 12

Now that we have all the pieces on our canvas, go through each one and clean it up a bit.
For this piece, I've used the Clone Stamp Tool to remove the tusk. A trick is to use the Clone Stamp Tool on a new clipping layer with the Sample set to All Layers. This will allow you to work freely without having to worry about cloning past the boundaries of the image.

I also copied portions of the trunk and manipulated it to rebuild the damaged sections.


Step 13

For the body, I've used the same techniques from the last step to remove the small portion of ear that was cropped with the piece.


Step 14

For the legs, I've continued the same process to remove the chains and rebuild the legs.


Step 15

The next step is to get all the colors to match. First, we'll decide which piece we want to match the color to. In this case, the "Body" layer is the largest piece with the most uniform color, so we will match the other pieces to that. Select one of the leg pieces and go to Image > Adjustments > Match Color. In the Source box, select the PSD file that you're working in. In the Layer box, select the "Body" layer. You can use the sliders to fine-tune the color correction.

Do this for the other leg piece. The resulting pieces should now appear similar in color


Step 16

The texture on the legs appears too flat. To add texture, we will sample some of the texture from the "Body" layer. Start by selecting a portion of the body piece that has good texture.


Step 17

Copy and Paste this piece above the leg layer and make it a clipping layer.


Step 18

Edit > Transform > Warp this layer to match the contours of the leg.

Use a Layer Mask to blend the texture into the leg. Next, set the Blending Mode to Darker Color

Continue this technique to add texture where needed.


Step 19

Use this same technique to build texture on the other leg


Step 20

Lastly, I've adjusted the color of the toenails to make them appear more natural. To do this, I've painted a cool gray color on a new clipping layer with the Blending Mode set to Color and the Opacity set to 37%


Step 21

We can now start building our scene. Before we start, I will mention that it is good practice to make a copy of your pieces before using them since we will be going back to the original unedited pieces at times

Now, flatten each piece to its own layer.

Next, make a copy of the body layer and Edit > Transform > Warp this so that it covers most of the interior of the glass. This layer will act as a backdrop to cover any unintentional gaps as we put the pieces together.


Step 22

Use the Pen Tool to trace around the inside of the glass. It helps to hide the "Body copy" layer so you can see the edges of the glass. Go to Window > Masks to open up your Masks Panel and select the "Add Vector Mask" button (Alternatively, you can just right-click the path and select "Create Vector Mask" as long as you still have the Pen Tool selected). This will allow us to update the path at any time to refine our mask.


Step 23

Make another copy of the body layer and Warp this one into position. This body layer will be used as the main body.


Step 24

Create a new Layer Mask. Use this mask to blend this layer in with the background body layer. Also, remove the parts of the body that are coming out the top of the glass.


Step 25

Make one last copy of the body layer and Warp it to appear as if it is bulging out the top of the glass.


Step 26

Use the Pen Tool to create a Vector Mask, just like we did in step 22.


Step 27

Next, make a copy of the "Head" layer and Warp this into position.


Step 28

Make a copy of the "Foot" layer and place it as shown. Create a new Layer Mask and mask out most of the leg, leaving just the foot.


Step 29

Make a copy of the "Thigh" layer and place it behind the "Foot" layer. Use a Layer Mask to blend the thigh into the rest of the body. It doesn't have to be perfect—we will fix anything that needs it later.


Step 30

Make another copy of the "Thigh" layer and Rotate and Scale (Command/Ctrl + T) into position.


Step 31

Create a Layer Mask to help create the illusion that this leg is wrapped around the foot.


Step 32

Go back to the original body layer and select some of the texture using one of the marquee tools. Copy and Paste the sampled texture over areas that need help blending in. Transform or Warp the texture into position and blend in using a Layer Mask.


Step 33

After you've done this, go through and merge each grouping of pieces into their own layer. This image should have four layers (not including the "Background" layer): Body, Head, Foot and Thigh. Go through each piece and apply the Sharpen Filter (Filter > Sharpen > Sharpen). This will help bring out the detail that was lost when we were manipulating the pieces.


Step 34

Our next step is to add some depth to our image. Just above the "Body" layer, create a new clipping layer with the Blending Mode set to Multiply. With a soft brush set to a low opacity, sample a dark gray color from the elephant and start painting over the low lights and shadows.


Step 35

Continue this technique with each piece of the elephant.


Step 36

Our next step is to make the elephant appear behind glass. To start, merge all the pieces of the elephant together (to make things easier, I've merged my scene down to three layers: the Background, the elephant pieces that appear inside the glass, and the pieces that appear outside of the glass. It might be a good idea to save this as a new file.


Step 37

On a new clipping layer, use a white brush and paint over the elephant where it might be making contact with the glass.


Step 38

Set this layer's Opacity to 27%. Also, adjust the layer's Blend If sliders to allow for the texture to show through.


Step 39

Continue this technique for other areas on the elephant, making sure each new layer is a clipping layer. I've also used Layer Masks to fade the effects as needed.


Step 40

Add another clipping layer and with a large, soft brush, paint in some white around the edges of the elephant.


Step 41

Add another clipping layer and with the same brush, paint in some larger areas to make it appear to reflect light. Change this layer's Opacity to 27%.


Step 42

Continuing this technique, add a shine with a harder edge. Change this layer's Opacity to 33%.


Step 43

To finish the elephant, I have painted a new eye. To do this, create a new layer and use the Ellipse Tool to make a dark brown ellipse. Add a subtle Drop Shadow and Rotate (Command/Ctrl + T) into position.


Step 44

Now, start to paint the eye using a new clipping layer. Use a hard black brush to paint in the pupil. After that, use a soft brush with a low Opacity to paint in colors of the iris and possible reflections. To finish, add some white dots to get that glossy, realistic effect to the eye.


Step 45

Open up the image of the dessert and extract just the whip cream topping with the help of the Pen Tool. Paste the image into our scene.


Step 46

Transform (Command/Ctrl + T) the topping into position


Step 47

Add a Hue/Saturation Adjustment layer to color correct the image. Note that I have used a Layer Mask to hide the cherry from the affects of the Adjustment Layer.


Step 48

Using the same techniques from Step 34, paint some shadows on a new layer to help add more definition to the whip cream. Do the same with the highlights, using a white color to enhance the highlights. Changes will be subtle, but effective.

Lastly, add the shadows casted by the whip cream on to the elephant. Make sure to do this on a new layer that is below the Whip Cream Layer.


Step 49

You're Done! Your image should resemble the following.

Related Posts
  • Design & Illustration
    Designing
    Create a Mixed Martial Arts Event Flyer in Photoshop0953 fight preview400
    Most of you have probably seen event posters displayed in your area promoting a boxing, mixed martial arts (MMA), Ultimate Fighter, or wrestling match. In this tutorial, I will show you how to create a similar event poster in Photoshop using several techniques including photo manipulation, retouching, and typography. Let's get started!Read More…
  • Photography
    Photo Effects
    How to Create a Magical Photo Manipulation: Post-Production0955 toys psdtuts toys in action 400x400
    Artists often work with a team of individuals to complete a project. This team could include a client, a creative director, an art director, a photographer, a retoucher, and a graphic designer. In this two-part tutorial, I teamed up with photographer Natalie Fobes to create a magical photo illustration that depicts a child interacting with toys that have come to life. In the process, we will show you how to not only shoot the photos that you need, but also, how to retouch them and combine them with stock photos to create artwork that closely resembles a sketch. Let's get started!Read More…
  • Design & Illustration
    Illustration
    Create a Clueless Racecar Driver Illustration in Photoshop0902 racer preview400
    Creating a high-impact and realistic caricature illustration can be a fun but extremely challenging task. In this tutorial, we will explain how to properly control all the elements of a composition including color balance, contrast, textures, and more, as well as all of the tools and techniques that you will need to know in Photoshop to build a highly entertaining and detailed caricature illustration. Let's get started!Read More…
  • Design & Illustration
    Designing
    Create a Delicious Print Ad Using Photo Manipulation Techniques in Photoshop0898 strawberry preview400
    Print designers often work with digital illustrators and CG artists to help produce their work. In this tutorial, we will continue to develop a character concept from a Cgtuts+ tutorial by Nacho Riesco and show you how to create a print ad by combining photo manipulation techniques with some renders from another tutorial. Let's get started!Read More…
  • Design & Illustration
    Photoshop
    Create a Colorful Dune Buggy Illustration in PhotoshopDesign and illustration
    In this tutorial, we will show you how to create a colorful and surreal dune buggy illustration using a mix of digital illustration and photo manipulation techniques. We will begin by laying out the basic idea of our artwork and will slowly add details until our illustration comes to life.Read More…
  • Design & Illustration
    Photoshop
    Create a Magical Circus Photo ManipulationDesign and illustration
    One of the best things about Photoshop is that it allows us to conjure up practically anything our imaginations can conceive. In this tutorial, you'll combine several stock images to create a surreal and magical circus photo manipulation. Read More…